BWJKJ - 5 MINUTE EPOXY GEL RESIN
- MSDS: BWJKJ
- Manufacturer: ITW DEVCON CORP
- Product Name: 5 MINUTE EPOXY GEL RESIN
- National Stock Number: 8040-00F037577
Product Identification
Product ID:5 MINUTE EPOXY GEL RESIN
MSDS Date:05/05/1992
FSC:8040
NIIN:00F037577
Kit Part:Y
MSDS Number: BWJKJ
Responsible Party
DANVERS, MA 01923-5000
US
Emergency Phone: 508-777-1100/804-463-3476
Info Phone: 508-777-1100/804-463-3476
Cage: 16509
Contractor
Telephone: 508-777-1100
Cage: 16509
Ingredients
BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,
CAS: 25068-38-6
RTECS: KD4380000
Fraction By Weight: >60%
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT): 11.4 G/KG EPOXY RESIN
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MILD-MODERATE IRRITATION. SKIN:
MAY BE ABSORBED THROUGH SKIN, MILD-MODERATE IRRITATION. MODERATE
SKIN SENSITIZER.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA, SKIN CONDITION.
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WARM
WATER. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN, IF NEEDED.
INGESTION: DON'T INDUCE VOMITING. GIVE 2 GLASSES OF WATER. OBTAIN
MEDICAL ATTE NTION IN ALL CASES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:400F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM. LARGE: POLYMER FOAM.
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:PREVENT SKIN & EYE CONTACT. SCRAPE UP &
DISCARD IN SUITABLE CONTAINERS. USE ABSORBENT MATERIAL IF
NECESSARY. WASH AREA W/AN INDUSTRIAL CLEANING AGENT. IF A SOLVENT
IS USED FOR CLEANING, TAKE PRECAUTIO NS AGAINSTFIRE & PERSONAL
OVEREXPOSURE.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. HANDLE
IAW/THE POTENTIAL HAZARD OF THE CURING AGENT USED.
Other Precautions:WEAR ADEQUATE PROTECTIVE EQUIPMENT IF CURED MATERIAL
IS SANDED/MACHINED.
Exposure Controls
Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPS.
Ventilation:LOCAL EXHAUST RECOMMENDED FOR CONFINED AREAS. GENERAL IS
ADEQUATE FOR NORMAL USE.
Protective Gloves:CHEMICAL RESISTANT RUBBER
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS.
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE. WASH THOROUGHLY AFTER USING & BEFORE EATING/SMOKING.
(SUPP)
Supplemental Safety and Health
WORK HYGIENE CONT'D: DESTROY LEATHER ARTICLES & SHOES THAT CAN'T BE
DECONTAMINATED.
Chemical Properties
Vapor Pres:0
Vapor Density:>1
Spec Gravity:1.2
pH:7
Solubility in Water:INSOLUBLE
Appearance and Odor:BLUE GEL W/FAINT ODOR
Percent Volatiles by Volume:100/WT
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & STRONG ACIDS.
Stability Condition to Avoid:OPEN FLAME & EXCESSIVE HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDE & ACIDS.
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN MIXED W/EPOXY
HARDENER. USE CAUTION WHEN MIXING LARGE QUANTITIES.
Disposal
Waste Disposal Methods:DISPOSE OF IN WASTE DISPOSAL FACILITY
IAW/FEDERAL, STATE LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.